Kodak BW400CN Film Review (Expired 35mm Film Photos)
Quick Kodak BW400CN film review to accompany my YouTube video. Here I share some expired 35mm film photos using this old film. 2006 dated film yet still nice results! (I think).
Kodak Professional BW400CN Discontinued
In August 2014 Kodak announced that it’s popular and readily available black and white film Kodak BW400CN would be discontinued. BW400CN was a special B&W film and unlike most in that it could be developed in normal high street stores such as Boots in the UK.
Kodak Black and White BW400 CN C41 film
Kodak BW400CN is a C41 film (like colour negative films) so can be developed in regular C41 chemistry. It is cheaper to develop C41 films in a high street store or photography lab than traditional B&W film. The only remaining C41 black and white film in production is Ilford XP2 Super 400.
Ilford XP2 Super vs Kodak BW400CN
As both films are 400 speed C41 black and white films they are very comparable. When I get timeI still need write an Ilford XP2 Super film review so I can’t link it yet. I sometimes use 120 Ilford XP2 Super 400 film in my medium format cameras such as the Fuji GF670 or the Mamiya 7. I can’t provide an accurate Kodak BW400CN vs Ilford XP2 Super comparison as the BW400CN film I use is 35mm format. Here is a sample 120 Ilford XP2 400 photo just as a sample.
Expired Kodak BW400CN film
I was kindly given over two full ‘bricks’ of 2006 dated expired Kodak BW400CN film. The film had not been refrigerated and was exposed to heat cold heat cold each summer and winter in an out building. When I first received the film I was using it just to test new cameras. It wasn’t until a few years or more later than a shot as few more rolls and really enjoyed the results. What had changed? My developing method!
C-41 Kodak BW400CN developing in B&W film chemistry. Why?
As you probably know i’m a bit of a strange one so I decided to develop my Kodak BW400CN in B&W film chemistry rather than C41 chemistry. Why? In the past especially I shot 90% black and white film so I could develop it at home. I knew C41 colour film could be developed in B&W film chemistry so using that logic I did the same for Kodak BW400CN film. Depending on what chemicals (and processing method) you use the results will vary.
Kodak BW400CN in Rodinal developer
In the past (especially) I used to develop my B&W film in Rodinal One Shot developer. Using this film chemistry I achieved the following results. I put the strong grain look down to the age of the film and soon stopped using it. It was a bit too grainy for me for female portraits.
Kodak BW400CN in Xtol developer (or Xtol + Rodinal)
Currently I tend to use Kodak Xtol developer or sometimes a mix of Xtol + Rodinal developers. Kodak Xtol produces a much smoother grain vs. Rodinal for any film and Kodak BW400CN was no different. When I shot a roll of this now 13 years expired Kodak BW400CN and developed it this way I was pretty impressed with the results. With the ever rising cost of new film this summer I decided to just start using the expired BW400CN as part of my day to day film.
Developing Kodak BW400CN (and rating it)
As my expired Kodak BW400CN film is now over 10 years old I rate the film at ISO 100 rather than the ISO 400 box speed. This is good practice for any film of this age (over expose it a few stops). When developing BW400CN in Xtol the film seems to retain any ‘blow/ clipped’ highlights nicely and produce smooth creamy whites. I think it even holds on to the highlight detail better than many modern true black and white films in B&W chemistry. For this reason I have been using BW400CN happily in harsh lighting conditions such as direct sunlight portraits.
35mm Kodak BW400CN Portraits (in Xtol)
More 35mm Kodak BW400CN Photos
Scanning Kodak BW400CN film
It is a very recent thing for me but currently i’m enjoying scanning black and white film in colour mode on the scanner. This gives the B&W film scans often a slight sepia to cyan cast. I’ve never been one to add a tone to a B&W film photo but i’m quite enjoying the perhaps more vintage look of a slight colour cast. Specific example above are both portraits and landscapes shot in France on Kodak BW400CN.
Film curling while scanning
Each film stock has it’s own unique properties. Some films are easy to scan and lie nice an flat. An example is 35mm Kodak T-Max 400 film. Kodak BW400 is the opposite and is extra curly! The photo above is 35mm BW400CN in the Epson V800 film holder. The film photo made nice ‘art’ but it was really to show how much this film curls. Once it is clipped into the film holder it scans quite flat so there are worse films to scan.
MrLeica.com YouTube video – BW400CN
Short YouTube video covering Kodak BW400CN and how you can still make great photos with very expired non-refrigerated film. Video shows some of the cameras used to make these images.
More black and white film reviews
- Fomapan 100
- Ilford FP4 Plus
- Ilford Pan F 50
- Ilford Pan 100
- Ilford Delta 100
- Ilford Delta 400
- Kodak Double-X 5222
- Kodak T-Max 100
- Kodak T-Max 400
- Kodak Tri-X 400
- Kentmere 100
You may also like… What Gear I Use for Portraits!
- See full details of my portrait photography lighting kit – HERE
- See full details of my portrait photography equipment kit – HERE